MODEL NUMBER AND SAFETY CERTIFICATION
- 品名規格：系列號+額定電流+額定電壓+認證符號
例子[example]:
3CTV 1A 250V 1)系列號 Part Number
2)額定電流 Rated Current
1） 2） 3） 3)額定電壓 Rated Voltage
1-2 額定電流和額定電壓
Rated Current And Voltage
額定電流： 100mA~6.3A
Rated Current: 100mA~6.3A
額定電壓：250V AC
Rated Voltage:250V AC
1-3標示Marking
保險絲上需有下列標示
The fuse shall have the following marking:
規格：特性符號+額定電流+額定電壓
Specification:Characteristic Symbol+Rated Voltage
100mA~800mA : _mA250V 1A~6.3A:_A250V
Trade mark:The Manufacture’s Logo+Part Number+Approvals
100mA~6.3A:
注意：對標示字樣大小沒有規定
Note:Size of the markings have not be specified.
2.適用範圍
SCOPE
適用於一般電子設備。Used in electronic equipment.
3.工程圖和結構
OUTLINE DRAWING AND STRUCTURE
3-1 工程圖（單位：mm）
Outline Drawing and Dimensions(Unit:mm)
3-2結構
Structure
|
編號 No. |
元件 Component |
材質 Material |
數量 Quantity |
| (1) |
熔絲 Wire |
合金 Alloy |
1 |
| (2) |
銅帽 Cap |
黃銅鍍鎳 Brass with mickel plated |
2 |
| (3) |
本體 Body |
玻璃管 Ceramic tube |
1 |
| (4) |
引線 Lead |
鍍錫銅線 Tinned Copper wire |
2 |
4.外觀及形狀
APPEARANCES AND CONFIGURATION
4-1外觀：不應有破碎、明顯的汙斑
Appearances:There shall no fragmentation and of remarkable blotch.
4-2形狀：帶腳的保險絲
Configuration:Axial Leaded Fuse.
5.物理特性
PHYSICAL CHARACTERISTIC
5-1 拉力測試
Tensile test
沿端子的軸向施加10N的拉力，持續1分鐘。
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.電氣特性
ELECTRICAL CHARACTERISTICS
熔斷/電流特性：
Pre-Arcing Time/Current Characteristic
a、Breaking capacity（分断能力）(Time Lag )
| 50A | 250V | AC |
Time Lag
| % of Ampere | Opening Rating Time |
| 150% | 60 minutes, Minimum |
| 210% | 2 minutes, Maximum |
| 275% | 400 msec., Min.; 10 sec. Max. |
| 400% | 150 msec., Min.; .3 sec. Max. |
| 1000% | 20 msec., Min.; 150 msec Max. |
c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.
d、ORDERING INFORMATION:
| Catalog Number | Ampere Rating | Voltage Rating | Nominal Resistance Cold mOhms | Nominal Melting i2tA2Sec. | Agency Approvals | |||
| VDE | UR | CQC | ||||||
| 3CTV-.100 | .100 | 250 | 3.300 | 0.00160 | × | |||
| 3CTV-.125 | .125 | 250 | 2.300 | 0.00790 | × | |||
| 3CTV-.160 | .160 | 250 | 1.700 | 0.0128 | × | |||
| 3CTV-.200 | .200 | 250 | 0.500 | 0.0200 | × | × | × | |
| 3CTV-.250 | .250 | 250 | 0.630 | 0.312 | × | × | × | |
| 3CTV-.315 | .315 | 250 | 0.460 | 0.422 | × | × | × | |
| 3CTV-.400 | .400 | 250 | 0.360 | 0.755 | × | × | × | |
| 3CTV-.500 | .500 | 250 | 0.310 | 1.32 | × | × | × | |
| 3CTV-.630 | .630 | 250 | 0.178 | 2.55 | × | × | × | |
| 3CTV-.800 | .800 | 250 | 0.125 | 3.25 | × | × | × | |
| 3CTV-.001 | 1.00 | 250 | 0.092 | 6.95 | × | × | × | |
| 3CTV-1.25 | 1.25 | 250 | 0.065 | 12.1 | × | × | × | |
| 3CTV-01.6 | 1.60 | 250 | 0.048 | 18.2 | × | × | × | |
| 3CTV-002. | 2.00 | 250 | 0.035 | 20.8 | × | × | × | |
| 3CTV-02.5 | 2.50 | 250 | 0.028 | 32.5 | × | × | × | |
| 3CTV-3.15 | 3.15 | 250 | 0.020 | 40.8 | × | × | × | |
| 3CTV-004. | 4.00 | 250 | 0.016 | 95.0 | × | × | × | |
| 3CTV-005. | 5.00 | 250 | 0.014 | 140 | × | × | × | |
| 3CTV-06.3 | 6.30 | 250 | 0.009 | 240 | × | × | × | |
Average Time Current Curves
7.環境特性
ENVIRONMENTAL SPECIFICATION
7-1 操作溫度範圍：-5℃~60℃
Operating Temperature: -5℃~60℃
7-2 保存條件
Storage Conditions
溫度：+10℃~60℃
Temperature: +10℃~60℃
在相對濕度≤75%下平均可存放3年
On average, It can be stored below the relative humidity or 75% for 3 years.
在非露天下，相對濕度為95%下最多可存放30天。
Without dew, It can be kept under humidity of 95% for 30 days.
8.焊接條件
SOLDERING PAAMETERS
8-1波峰焊
Wave Solder
焊接溫度：260±5℃
Soldering Temperature:260±5℃
焊接時間：4 Sec. Max.
Soldering Time:4 Sec.Max.
8-2手工焊錫
Manual Solder
焊接溫度：350±5℃
Soldering Temperature: 350±5℃
焊接時間：3 Sec. Max.
Soldering Time: 3 Sec. Max.
9.其他使用注意事項
OTHER NOTICE IN USING
如果需在保險絲上加熱縮套管，烘烤溫度與時間需參照以下規定
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
設定烘烤溫度：不大於150℃ 烘烤時間：50s Max.
The temperature should be sel under 150℃,roast time:50s Max.
