|
Model |
Marking |
V max
(V dc) |
Imax
(A) |
I hold @25°C (A) |
I trip @25°C (A) |
Pd Typ. (W) |
Maximum Time To Trip |
Resistance |
||
|
|
|
|
|
|
|
|
Current (A) |
Time (Sec) |
R i min (W) |
R1max (W) |
|
SMD0603-001SF |
X |
60 |
20 |
0.01 |
0.03 |
0.5 |
0.2 |
1.00 |
15.000 |
100.000 |
|
SMD0603-002SF |
Y |
60 |
20 |
0.02 |
0.06 |
0.5 |
0.2 |
1.00 |
12.000 |
70.000 |
|
SMD0603-002SF9v |
Y |
9 |
20 |
0.02 |
0.06 |
0.5 |
0.2 |
1.00 |
12.000 |
70.000 |
|
SMD0603-003SF |
Z |
30 |
20 |
0.03 |
0.09 |
0.5 |
0.2 |
1.00 |
6.000 |
50.000 |
|
SMD0603-003SF9v |
Z |
9 |
20 |
0.03 |
0.09 |
0.5 |
0.2 |
1.00 |
6.000 |
50.000 |
|
SMD0603-004SF |
- |
24.0 |
20 |
0.04 |
0.12 |
0.5 |
0.20 |
1.00 |
4.000 |
40.000 |
|
SMD0603-005SF |
- |
15.0 |
20 |
0.05 |
0.15 |
0.5 |
0.25 |
1.00 |
3.800 |
30.000 |
|
SMD0603-005SF9v |
- |
9.0 |
20 |
0.05 |
0.15 |
0.5 |
0.25 |
1.00 |
3.800 |
30.000 |
|
SMD0603-010SF |
1 |
15.0 |
35 |
0.10 |
0.30 |
0.5 |
0.5 |
1.00 |
0.900 |
6.000 |
|
SMD0603-010SF9v |
1 |
9.0 |
35 |
0.10 |
0.30 |
0.5 |
0.5 |
1.00 |
0.900 |
6.000 |
|
SMD0603-020SF |
2 |
9.0 |
35 |
0.20 |
0.50 |
0.5 |
1.0 |
0.60 |
0.550 |
3.500 |
|
SMD0603-020SF16v |
2 |
16.0 |
35 |
0.20 |
0.50 |
0.5 |
1.0 |
0.60 |
0.550 |
3.500 |
|
SMD0603-025SF |
2 |
9.0 |
35 |
0.25 |
0.55 |
0.5 |
8.0 |
0.08 |
0.500 |
3.000 |
|
SMD0603-025SF16v |
2 |
16.0 |
35 |
0.25 |
0.55 |
0.5 |
8.0 |
0.08 |
0.500 |
3.000 |
|
SMD0603-035SF |
3 |
6.0 |
35 |
0.35 |
0.75 |
0.5 |
8.0 |
0.10 |
0.200 |
1.000 |
|
SMD0603-040SF |
5 |
6.0 |
35 |
0.40 |
0.80 |
0.5 |
8.0 |
0.10 |
0.150 |
0.900 |
|
SMD0603-050SF |
5 |
6.0 |
35 |
0.50 |
1.00 |
0.5 |
8.0 |
0.10 |
0.100 |
0.800 |
|
SMD0603-050SF12v |
5 |
12.0 |
35 |
0.50 |
1.00 |
0.5 |
8.0 |
0.10 |
0.100 |
0.800 |
|
SMD0603-060SF |
7 |
6.0 |
35 |
0.60 |
1.20 |
0.5 |
8.0 |
0.10 |
0.080 |
0.600 |
|
SMD0603-065SF |
7 |
6.0 |
35 |
0.65 |
1.30 |
0.5 |
8.0 |
0.10 |
0.070 |
0.550 |
|
SMD0603-075SF |
7 |
6.0 |
35 |
0.75 |
1.40 |
0.5 |
8.0 |
0.10 |
0.060 |
0.450 |
|
SMD0603-075SF12 |
7 |
12.0 |
35 |
0.75 |
1.40 |
0.5 |
8.0 |
0.10 |
0.060 |
0.450 |
|
SMD0603-100SF |
0 |
6.0 |
35 |
1.00 |
2.00 |
0.5 |
8.0 |
0.10 |
0.050 |
0.300 |
V max = Maximum operating voltage device can withstand without damage at rated current (Imax).
I max = Maximum fault current device can withstand without damage at rated voltage (V max).
I hold = Hold Current. Maximum current device will not trip in 25°C still air.
I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.
Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage.
Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C.
R1max = Maximum device resistance is measured one hour post reflow.
CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.
Environmental Specifications
|
Test |
|
|
|
Conditions |
|
|
|
Resistance change |
|
|
|
Passive aging |
|
|
|
+85°C, 1000 hrs. |
|
|
±5% typical |
|
|
|
|
Humidity aging |
|
|
|
+85°C, 85% R.H. , 168 hours |
|
±5% typical |
|
|
||
|
Thermal shock |
|
|
|
+85°C to -40°C, 20 times |
|
|
±33% typical |
|
||
|
Resistance to solvent |
|
|
|
MIL-STD-202,Method 215 |
|
|
No change |
|
|
|
|
Vibration |
|
|
|
MIL-STD-202,Method 201 |
|
|
No change |
|
|
|
|
Ambient operating conditions : - 40 °C to +85 °C |
||||||||||
|
Maximum surface temperature of the device in the tripped state is 125 °C |
||||||||||
Thermal Derading Chart
Recommended Hold Current(A) at Ambient Temperature(°C)
|
Model |
Ambient Operation Temperature |
||||||||
|
-40°C |
-20°C |
0°C |
25°C |
40°C |
50°C |
60°C |
70°C |
85°C |
|
|
SMD0603-001SF |
0.016 |
0.014 |
0.012 |
0.010 |
0.008 |
0.007 |
0.006 |
0.005 |
0.0035 |
|
SMD0603-002SF |
0.031 |
0.027 |
0.024 |
0.020 |
0.016 |
0.014 |
0.012 |
0.011 |
0.007 |
|
SMD0603-003SF |
0.047 |
0.041 |
0.036 |
0.030 |
0.024 |
0.021 |
0.018 |
0.016 |
0.0108 |
|
SMD0603-004SF |
0.052 |
0.048 |
0.044 |
0.040 |
0.032 |
0.028 |
0.024 |
0.020 |
0.012 |
|
SMD0603-005SF |
0.065 |
0.060 |
0.055 |
0.050 |
0.040 |
0.035 |
0.031 |
0.025 |
0.015 |
|
SMD0603-010SF |
0.13 |
0.12 |
0.11 |
0.10 |
0.08 |
0.07 |
0.06 |
0.05 |
0.03 |
|
SMD0603-020SF |
0.27 |
0.25 |
0.23 |
0.20 |
0.17 |
0.14 |
0.12 |
0.10 |
0.07 |
|
SMD0603-025SF |
0.32 |
0.29 |
0.27 |
0.25 |
0.21 |
0.18 |
0.16 |
0.14 |
0.10 |
|
SMD0603-035SF |
0.47 |
0.41 |
0.38 |
0.35 |
0.29 |
0.26 |
0.24 |
0.20 |
0.14 |
|
SMD0603-040SF |
0.54 |
0.47 |
0.43 |
0.40 |
0.33 |
0.29 |
0.27 |
0.22 |
0.16 |
|
SMD0603-050SF |
0.67 |
0.59 |
0.54 |
0.50 |
0.41 |
0.37 |
0.34 |
0.29 |
0.20 |
|
SMD0603-060SF |
0.81 |
0.70 |
0.651 |
0.60 |
0.49 |
0.44 |
0.41 |
0.34 |
0.24 |
|
SMD0603-065SF |
0.87 |
0.76 |
0.71 |
0.65 |
0.54 |
0.48 |
0.44 |
0.37 |
0.26 |
|
SMD0603-075SF |
0.98 |
0.85 |
0.81 |
0.75 |
0.60 |
0.54 |
0.44 |
0.40 |
0.31 |
|
SMD0603-100SF |
1.19 |
1.13 |
1.08 |
1.00 |
0.80 |
0.72 |
0.59 |
0.54 |
0.43 |
Thermal Derating Curve
Average Time-Current Curve
Soldering Parameters
|
Profile Feature |
Pb-Free Assembly |
|
Average Ramp-Up Rate(Ts max to T p) |
3℃/second mac. |
|
Preheat -Temperature Min(Ts min) -Temperature Max(Ts max) -Time(Ts min to Ts max) |
150℃ 200℃ 60~180 seconds |
|
Time maintained above: -Temperature(TL) -Time(tL) |
217℃ 60~150 seconds |
|
Peak Temperature(Tp) |
260℃ |
|
Ramp-Down Rate |
6℃/second max. |
|
Time 25℃ to Peak Temperature |
8 minutes max |
|
Storage Condition |
0℃~30℃,30%-60%RH |
Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free
Recommended maximum paste thickness is 0.25mm
Devices can be cleaned using standard industry methods and solvents.
Note 1:All temperature refer to topside of the package, measured on the package body surface.
Note 2: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements
Physical Dimensions(mm.)
|
型號 |
A |
B |
C |
D |
E |
|||||||
|
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
Min. |
Min. |
|||||
|
SMD0603-001SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-002SF9v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-002SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-003SF9v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-003SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-004SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-005SF9v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-005SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-010SF9v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-010SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-020SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-020SF16v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-025SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-025SF16v |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
1.00 |
0.15 |
0.10 |
||||
|
SMD0603-035SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.35 |
0.90 |
0.15 |
0.10 |
||||
|
SMD0603-040SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.40 |
0.90 |
0.15 |
0.10 |
||||
|
SMD0603-050SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-050SF12v |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-060SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-065SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-075SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-075SF12V |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
|
SMD0603-100SF |
1.45 |
1.85 |
0.65 |
1.05 |
0.55 |
1.15 |
0.15 |
0.10 |
||||
Termination Pad Characteristics
Terminal pad materials：Tin-plated Nickel-Copper
Terminal pad solder ability：Meets EIA specification RS186-9E and ANSI/J-STD-002 Category 3.
Recommended Pad Layout (mm.)
Tape & reel packaging per EIA481-1
|
Tape And Reel Specifications (mm)
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Storage And Handling |
||
|
‧ Storage conditions：30°C max, 30%-60% R.H. |
||
|
‧ Devices may not meet specified performance |
||
|
if storage conditions are exceeded. |
Part Number System
SMD 0603 - 口口口 S F 口口V
special voltage Rating(Optional)
Lead-Free
Tin-plated Nickel-Copper
Holding Current Rating
Device Dimensions: Length/width(Unit:1/100 inch) Size1608mm / 0603 inch
Surface Mount Device
